| |
Sections:
Data
Acquisition Box Upgrades
Software,
Adaptors, and Accessories
Sensors
Payment Information, Shipping and
Handling |
|
Next
Top |
Corsa
Data Acquisition Box Upgrades |
|
| AC5-3 |
Third (Vertical) Accelerometer |
$300.00 |
| MM2 |
Expand Box memory to 256kb static RAM |
$75.00 |
| MM5 |
Expand Box memory to 512kb
static RAM |
$200.00 |
| |
This is the recommended size
for most road racing and oval track applications. |
|
| MM9 |
Expand Box memory to 896Kb
static RAM |
$400.00 |
| |
For long races or high sampling
rates with large number of channels. |
|
Next
Back
Top |
Software,
Adaptors, and Accessories |
|
| Part# |
Description |
Price
each |
| CBX-4 |
4' extension Sure-seal cable
|
$20.00 |
| CBX-6 |
6' extension Sure-seal cable |
$20.00 |
| CBX-8 |
8' extension Sure-seal cable |
$20.00 |
| CBX-10 |
10' extension Sure-seal cable |
$20.00 |
| CBX-CU |
Custom extension Sure-seal cable |
$25.00 |
| DB-1-2 |
DB9 channel 2 to Sure-seal connector |
$30.00 |
| |
Splits channel 2 from a DB9 connector on
the Corsa box to a Sure-seal connector. (Appropriate
cable is provided for sensors ordered with Corsa box.) |
|
| DB-3 |
DB9-Sure-seal 3 way splitter |
$40.00 |
| |
Splits 3 channels from a DB9 connector
on the Corsa box to separate Sure-seal connectors for
sensors. (Appropriate cable is provided for sensors
ordered with Corsa box.) |
|
| DB-5 |
DB9-Sure-seal
5 way splitter |
$60.00 |
| |
Splits 5 channels from a DB9 connector
on the Corsa box to separate Sure-seal connectors for
sensors. (Appropriate cable is provided for sensors
ordered with Corsa box.) |
|
| DB-CUST |
Custom DB9-Sure-seal splitter |
Call for pricing |
| |
Splits one to six channels in a non-standard
manner from DB9 connector on the Corsa box to separate
Sure-seal connectors for each sensor. Call for pricing. |
|
| DB9-C1 |
Custom 1' DB9 Cable |
$30.00 |
| DB9-C6 |
6' DB9 Cable |
$5.00 |
| DB9-C10 |
10' DB9 Cable |
$5.00 |
| DCB |
Driver Control
Box |
$90.00 |
| |
A Driver Control Box is included in a the
basic Corsa system package. |
|
| DCB-C6 |
6' DCB Cable |
$5.00 |
| DCB-C10 |
10' DCB Cable |
$5.00 |
| DCB-L |
Driver Control
Box with Lap |
$90.00 |
| |
Driver Control Box with Lap Beacon connectors.
A DCB-L is included free of charge if a lap becon (LAP1)
is ordered with the Basic Corsa System. |
|
| LAP1 |
Lap Beacon |
$350.00 |
| |
Complete with trackside transmitter, in-car
receiver, dashboard lap time display and cable to connect
to Corsa system. |
|
| MT1 |
Rubber vibration
mounts (set of four) |
$15.00 |
| |
Rubber mounting blocks with 1/4 - 20 stud
at each end. Useful for isolating the accelerometers
in extreme vibration situations. |
|
| R-KIT-F |
Connector Kit -female |
$5.00 |
| |
Sure-seal connectors for user wiring attachment
to non-Corsa provided sensors. |
|
| R-KIT-M |
Connector Kit - male |
$5.00 |
| |
Sure-seal connectors for user wiring attachment
to non-Corsa provided sensors. |
|
| RET |
Retrofit charge |
$50.00 |
| |
Added charge if memory, accelerometer,
display interface, or lap timer options are added later
instead of when the system is first shipped to the customer. |
|
| RPM |
RPM Box |
$160.00 |
| |
The RPM box supports up to four speed inputs
and one counting input. The red wire allows for
easy hookup to tachometer output on electronic ignitions.
Points ignition is also supported. Only one RPM
box may be hooked up to a Corsa CS1 system. An
RPM box is included with the basic Corsa system package. |
|
| SF3 |
Wm. C. Mitchell DeBrief 3 software for
Windows 95/98 |
$495.00 |
| Wm.
C. Mitchell Software Homepage |
Optional software adds track mapping, driver
control icons, animation of suspension motion, and much
more. Very useful for road racing and oval track applications.
|
|
| TKA5 |
Thermocouple
Interface, 5 Channels |
$395.00 |
| |
Has connectors for up to five K-type thermocouples.
Standard range: 32 to 1800 degrees F. Includes
6 or 10 foot cable to connect to the Corsa box. |
|
| USBSER |
USB to Serial Port Adapter |
$80.00 |
| WCB |
WinCorsa Basic Software |
$95.00 |
| |
This is the standard software
package that is included with any CS1 system or can
be purchased as an upgrade at the list price. WinCorsa
Basic is compatible with Windows 95, 98, ME, NT4, and
2000. Visit our software section for information on
the features included with this package. |
|
| WCP |
WinCorsa Pro Software |
$245.00 |
| |
This is the professional version
of our WinCorsa software. This package contains all
of the features of WCB with additional analysis tools
included. Please visit our software section for more
information on the features included with this package.
If you currently own or are purchasing WCB, you can
upgrade to WCP for the discount price of $150. |
|
| WCP-INC |
WinCorsa Pro Software - upgrade
from WCB |
$150.00 |
Next
Back
Top |
Sensors |
|
| Part# |
Description |
Price
each |
| LP75 |
Linear Pot, 75mm (approx. 3") Stroke
|
|
| |
Same details as LP100. |
|
| LP100 |
Linear Pot,
100mm (approx. 4") Stroke |
$280.00 |
| |
Professional linear potentiometers, sealed
to IP66 standards, these sensors have round bodies approx.
1/2" in diameter and are 4" longer than the
stroke length. The body and the moving rod are both
fitted with rod end bearings so the pot mounts easily
like a miniature shock absorber. These are commonly
used for measuring suspension motion. Other lengths,
50mm to 350mm long are available by special order. Call
for prices on special lengths. |
|
| LP150 |
Linear Pot, 150mm (approx. 6") Stroke |
$280.00 |
| |
Same details as LP100. |
|
| LP200 |
Linear Pot, 200mm (approx. 8") Stroke |
$300.00 |
| |
Same details as LP100. |
|
| LP250 |
Linear Pot, 250mm (approx. 10") Stroke |
$300.00 |
| |
Same details as LP100. |
|
| LP300 |
Linear Pot, 300mm (approx. 12") Stroke |
$320.00 |
| |
Same details as LP100. |
|
| LPC |
Linear Pot, Custom Stroke |
|
| |
Lengths 50mm to 350mm long, in 25mm increments,
are available by special order. Call for prices on special
lengths. |
|
| LS1.5 |
Linear Pot,
1.5" Stroke, Spring Loaded |
$80.00 |
| |
This small potentiometer has a spring-loaded
plunger that can "ride" directly on an A-arm or linkage
part. The sensor body can be strapped to the suspension
or glued to the chassis. |
|
| PS26G |
Pressure Sensor
0-26psi Gauge |
$190.00 |
| |
Pressure sensor (0-26psi) with stainless
steel housing and 1/4" NPT thread. Good for fuel pressure
on carbureted engines, and other low pressure applications.
1/8" NPT adapter included. |
|
| PS50A |
Pressure Sensor
0-50psi Absolute |
$190.00 |
| |
Pressure sensor (0-50psi absolute) with
steel housings and 1/4" NPT thread. Use for boost, air,
etc. 1/8" NPT adapter included. Note that this
an absolute sensor (referenced to vacuum as opposed
to ambient pressure). This sensor includes all
accessories pictured with the PS24G sensor. |
|
| PS130G |
Pressure
Sensor 0-130psi Gauge |
$190.00 |
| |
Pressure sensor (0-130psi) with steel housings
and 1/4" NPT thread. Use for fuel, oil pressures, etc.
1/8" NPT adapter included. This sensor includes
all accessories pictured with the PS24G sensor. |
|
| PS265G |
Pressure
Sensor 0-265psi Gauge |
$190.00 |
| |
Pressure sensor (0-265psi) with steel housings
and 1/4" NPT thread. Use for fuel, oil pressures, etc.
1/8" NPT adapter included. |
|
| PS2200G |
Pressure
Sensor 0-2200psi (not for use with brake fluid) |
$190.00 |
| |
Pressure sensor (0-2200psi) with steel
housings and 1/4" NPT thread. Use for fuel, water,
oil pressures, etc. Note that this sensor is not
to be used for brake pressure; instead use PS2200G-B
for brakes. |
|
| PS2200G-B |
Pressure
Sensor 0-2200psi (for brake fluid) |
$190.00 |
| |
Pressure sensor (0-2500psi) with steel
housings and 1/4" NPT thread. Use for brake fluid pressure. |
|
| PSA |
Low pressure
sensor for aerodynamics |
$140.00 |
| |
Differential pressure sensor, 0 -- 34 inches
of water or 0 -- 1.25 psi. Has two input tubes and measures
the differential pressure between them. Good for measuring
airbox pressure, aerodynamics, etc. |
|
| PST |
Turbo
Pressure Sensor |
$110.00 |
| |
PST is used to measure manifold vacuum
and boost pressure in turbocharged or supercharged engines.
It reads from 20 inches Hg vacuum up to 15 pounds of
positive boost. This sensor also works with non-super-charged
engines. |
|
| SP10 |
String Pot,
Miniature, 10" Stroke |
$199.00 |
| |
The miniature string pot is great for steering,
throttle and many other applications. Stroke lengths
from 10" to 100" are available by special order. |
|
| SP20 |
String Pot,
Miniature, 20" Stroke |
$199.00 |
| |
The miniature string pot is great for steering,
throttle and many other applications. Stroke lengths
from 10" to 100" are available by special order. |
|
| SS1 |
Speed
Sensor, Hall Effect |
$70.00 |
| |
Speed sensor for driveshaft,
crank, or wheel speed. Includes 4 magnets. Requires
magnet(s) attached to the moving part, with the South
pole of the magnet facing the sensor. This is a Hall-effect
sensor. 15/32 - 32 threaded body.0.125 inch nominal
air gap, works with 0 -- .250 air gap. |
|
| SS2 |
Speed
Sensor |
$50.00 |
| |
Speed sensor for driveshaft,
crank, or wheel speed. Includes 4 magnets. Requires
magnet(s) attached to the moving part, with either pole
of the magnet facing the sensor. 5/16 - 24 threaded
body. Fits existing hole in Lenco transmissions and
some other applications. |
|
| SS5 |
Inductive
Speed Sensor |
$70.00 |
| |
Speed sensor for driveshaft,
crank, or wheel speed. This sensor does not use magnets
- it senses variances in magnetic field surrounding
boltheads or other ferrous materials. Threaded
portion of sensor body is 1.00" in length with
15/32" - 32 thread. This sensor has an applicable
sensing range of .050 - .150." |
|
| TK1 |
Thermocouple,
1/8" Standard |
$49.00 |
| |
(Requires thermocouple interface, TKA5) Inconel probe,
1/8" diameter, 6" long, connected to 36" cable with
stainless steel overbraid and miniature SMP-mini type
K connector. |
|
| TK2 |
Thermocouple,
Fast Response |
$59.00 |
| |
(Requires thermocouple interface, TKA5) The tip of the
1/8" diameter probe is reduced to .062" and a fast-response
thermocouple is welded inside the tip. Much more durable
than the exposed wire type and responds almost as fast.
Same 36" steel braided cable as TK1. For measuring exhaust
gas temperature and other purposes. |
|
| TK2L |
Thermocouple,
Fast Response |
$79.00 |
| |
TK2 with extra length. |
|
| TK3 |
Thermocouple,
Exposed Tip |
$49.00 |
| |
(Requires thermocouple interface, TKA5) Inconel probe,
1/8" diameter, 6" long, with exposed thermocouple wire
at tip. Fastest response, but not as durable as TK2.
Good for some drag racing EGT applications. |
|
| TK4 |
Thermocouple,
Drag Race industry standard |
$49.00 |
| |
(Requires thermocouple interface,
TKA5) Thermocouple for EGT in drag racing applications.
Comes complete with threaded nut and compression ferrule
for 7/16 - 20 male threaded fitting found on some drag
racing headers. 1/4 " diameter probe with heavy gauge
exposed wire tip. |
|
| TK6 |
Thermocouple,
3/16" Heavy Duty |
$49.00 |
| |
(Requires thermocouple interface, TKA5) Thermocouple
for heavy-duty turbocharged and turbo-diesel applications.
3/16" diameter, closed end probe. |
|
| TK6L |
Thermocouple,
3/16" Heavy Duty |
$69.00 |
| |
TK6 with extra length. |
|
| TKB |
Weld-on fitting for headers |
$4.00 |
| |
Weld-on 1/8" NPT fitting for headers. Stainless
Steel. Fits TKF and TKF6. Not for use with TK4. |
|
| TKF |
Fitting
for EGT |
$10.00 |
| |
Stainless steel compression
fitting, for 1/8" NPT thread on header. Re-usable and
more durable than brass fittings. |
|
| TKF6 |
Fitting
for TK6 |
$10.00 |
| |
Compression fitting for TK6.
3/16 ID, 1/8 NPT thread. |
|
| TKIR2 |
Infrared
Thermocouple |
$180.00 |
| |
(Requires thermocouple interface,
TKA5) For measuring tire temperatures. Mount in wheelwell.
Wide field of view covers most of the tire's width.
Temperature range 70 to 320 F. Includes 36" connector
cable. |
|
| TS1 |
Temperature
Sensor - 50 to + 275 F |
$40.00 |
| |
These small (about 1/4" diameter) sensors
are ideal for measuring air or surface temperatures.
They can easily be adapted to fittings for water and
oil temperatures. No thermocouple interface is needed
for these sensors. |
|
| TS2 |
Temperature
Sensor - 50 to + 375 F |
$60.00 |
| |
This sensor is identical to the TS1 sensor
but has a higher temperature range. |
|
Back
Top |
Payment Information, Shipping and Handling |
|
| |
Payment
Requirements: We accept personal or company checks,
and VISA and MasterCard.
25% deposit required on orders from our Price List.
50% deposit required on special orders.
Balance due at time of shipment.
Cancellation charge: $25
Standard shipping charges:
$40 per system, $15 for accessories.
All prices are in US Dollars
For more ordering information, click
here. |
|
